Industrial Vacuums

Partner with industrialvacuums.org

Industrial Vacuum Cleaners from Bvc.co.uk

Author: Gareth Hoyle

Domestic vacuums will not provide the range and features needed to vacuum large areas quickly and efficiently. Industrial cleaning requires a much higher performance level and domestic machines will not be able to meet the demands of intensive cleaning tasks.

Industrial Vacuum Cleaners

Industrial vacuum cleaners will have a number of benefits over domestic cleaners including:

"    Electrical cord - domestic vacuums work off standard wall sockets. The electrical cord will be limited to just two or three metres in most cases and this means you will have to spend time fitting extension cables to reach larger areas.  Industrial vacuum cleaners will have much longer cords to allow you to cover a larger area. Many designs also contain their own power source which means they are cordless and do not have to be plugged in. This is useful for cleaning areas where electrical power points are not easily accessible or available.
"    Mobility - you may have noticed when you are vacuuming your own home that domestic vacuums can be difficult to move around. The runners/wheels are often inferior and the units heavy. This makes them difficult to push them around as you are cleaning. Industrial vacuum cleaners are designed for maximum efficiency and have more robust runners/wheels that make it much easier to move these devices around. Even though some industrial vacuum cleaners will be heavier the domestic units the superior runner/wheels will actually make them much easier to use.
"    Capacity - domestic vacuum cleaners only have small five to ten litre vacuum drums for collecting dust, dirt and liquid.  This means you would have to constantly change the bag or empty the drum if you were cleaning larger areas. Industrial vacuum cleaners are much larger and can have extra large drums that will collect up to 50 litres.
"    Vacuum Heads - domestic vacuum units only have small hoses and suction heads. This means it will take a long time to clean larger areas. Industrial vacuum cleaners are designed with a range of different head sizes. This means you can choose the appropriate vacuum for the area you have to clean saving a lot of time and effort.
"    Wet and Dry - although there are some domestic vacuum designs that offer wet and dry cleaning these will not be effective at cleaning larger areas or those that are heavily soiled. Industrial wet and dry vacuum cleaners are designed to be used with more powerful cleaning agents for heavy dirt and staining. These vacuums are also more powerful and able to remove larger volumes of liquid and dirt from surfaces.
"    Running Time - domestic vacuum cleaners will overheat and could break down very quickly if you use them continuously for long stretches of time. Industrial vacuum cleaners are designed to a higher specification and can be used for three to four hours at a time without overheating.

Industrial vacuum cleaners are essential for the cleaning and maintenance of larger areas.

Article Source: http://garethhoyle.articlesbase.com/industrial-articles/industrial-vacuum-cleaners-from-bvccouk-3720828.html

About the Author

Bvc.co.uk can supply the widest range of industrial vacuum cleaners that provide a cost effective and long lasting solution to your business with one of our industrial vacuum .

Centrifugal Blowers for Industrial Processes

Author: Susanna Terlitskaia

Most industrial fans make some kind of noise but with a lot of the new models being released now the noise level is minimal. Some can make more noise than others but this depends on the size of the fan and also the conditions which it is working in.

Centrifugal ventilator has a number of blades mounted around the hub, which turns on a shaft that passes through the housing.

A Centrifugal fan can come in three different types of fan blades. They can come with forward curved blades, backward curved blades and straight radial blades. The type you need will come down to what the conditions are within the area in which you intend to use the device.

Tough applications mean tough fans and blowers by Canada Blower. Canada Blower is a world wide distributor of industrial process ans OEM fans and blowers, as well as fan / blower components; including high pressure blowers, high temperature fans, spark resistant and explosion proof ventilators, tubeaxial and vaneaxial high pressure ventilators. Canada Blower also does existing fans and blowers repairs, re-build, as well as dynamical wheels balancing. High-efficiency impellers result in low power consumption, operating costs, and quieter operation. All metal hardware is completely sealed from exposure to corrosion by incapsulating into FRP or plastic; the steel support frame and motor base are powder coated with a corrosion-resistant finish. In addition to being highly resistant to chemical corrosion, PP fans are self-extinguishing and will not support combustion.

A centrifugal blower is a fan designed to move air or gases in a confined area. The centrifugal blower has a number of blades mounted around the hub, which turns on a shaft that passes through the housing. The gas enters the side of the fan wheel and by use of centrifugal force(hence the name) accelerates over the fan blades. A centrifugal blower is usually used in factories or large open places that need air flow.

This could be an underground carpark, a gymnasium or any other open space with static air. There are many different centrifugal blowers on the market today and choosing one will depend on a number of factors.

When inquiring about purchasing a centrifugal fan you will more than likely need someone from the company in which your purchasing the fan to come and take a look at the conditions the fan will be placed and also to check what kind of air pressure there is within the area.

The size of the area in which the centrifugal blower is to be used will obviously play a major part in the decision of how large it needs to be and how much air it can actually blow through the area. There are many different sizes that you can get to cover any area but depending on your circumstances you may need more than one to do the job adequately.

The type of air that is in the premises will also play a large role in which type of Centrifugal Blower you need. If the centrifugal fan is to be used in an area where the air conditions are standard then no adjustments will need to be made to the actual fan itself. On the other hand if you are going to operate the fan in other types of air density then adjustments can be made to the static pressure and brake horsepower.

Another point to be made when you are interested in purchasing a centrifugal blower is where you intend to put it. There are many different styles of centrifugal blowers, they include roof and ceiling ventilators, pressure and volume blowers, duct fans and blowers or freestanding fans and plenum fans.

There is obviously an advantage with freestanding fans as you have the opportunity of moving it to different areas of the building/factory, which is an advantage. If you do have it mounted then it is out of the way and not taking up valuable room. Most Industrial fans come with a safety guard on them now which is made so that no human appendages can accidentally go into the fan. Most centrifugal fans come with an electric motor although they do make ones now which run off an generator also. This is a huge advantage if there is a power failure within the premises.

For additional information please refer to http://industrialpressureblower.com/index.html.

Susanna Terlitskaia
Industrial Ventilation Engineer
Industrial Pressure Blower Co.
http://industrialpressureblower.com/contact.html
http://industrialpressureblower.com/inquiry.html

Article Source: http://www.articlesbase.com/industrial--articles/centrifugal-blowers-for-industrial-processes-1317385.html

About the Author

Oleg Chechel Ventilation Equipment Designer Canada Blower http://www.canadablower.com/index.html http://www.canadablower.com/oem/index.html

How to Clean Greasy Floors of Factory

Author: Paul Fuller

Are you having a hard time on cleaning greasy floors of your large factory or workshop? Wondering on how to clean these greasy floors effectively and in no time at all? One solution is to use cleaning machines, which are the best, tested and proven in addressing many floors problems. Two of these cleaning machines that play a great role in floor cleaning effectively, powerful and efficiently are the floor scrubber or cleaners and steam vacuum cleaners.

How?

1) Using floor scrubbers or cleaners

A good example of floor scrubber or cleaners is the Salla 500 Max, the ideal and affordable factory floor cleaning machine. A walk behind battery-powered operation designed to withstand harsh operating environments. One unique feature of this factory floor cleaner is that it can be transformed to function as a floor scrubber/dryer, dry sweeper or portable wet/dry vacuum cleaner in seconds. Imagine you will not only get one machine, but three. It is a 3-in-1 floor cleaner machine, a perfect solution for factory or warehouse floors that require scrubbing, sweeping and vacuuming.

Whatever floor surface (safety floor, sealed concrete, checker plate etc), the Salla 350/500 is a fast, effective and efficient solution to clean them all. It comes with dual contra-rotating cylindrical brushes that penetrate deep into profiled factory floor surfaces and actively lift the dirt, and then the dirt is simultaneously extracted dry straight off the brushes or in dirt filled solution by a vacuum squeegee.

Pre-spray greasy floors with degreaser or citrus based detergent that is effective on grease to help reduce cleaning time if using plain water. The Salla 350/500 floor cleaner has also an optional heavier duty brushes with harder bristles for greater cleaning or degreasing of factory floors.

(2) Using steam vacuum cleaners

Another great solution in removing grease from floors is using the JetVac / Steambox range of industrial steam vacuums. Unlike the Salla that uses agitation to break down grease while JetVac steam vacuum uses high temperature dry steam to emulsify grease into a liquid form and remove the grime with its built-in vacuum. JetVac steam cleaner machines may take a little longer and require more effort in cleaning greasy floors than a Salla 350/500, but it uses less water and no detergents are required.

Aside from cleaning grease and oil from floors, JetVac is also effectively for many other cleaning applications like detail cleaning of equipment. That is why JetVac Maxi and JetVac Major steam vacuums are very popular in food and beverage production environments.

Article Source: http://www.articlesbase.com/tools-and-equipment-articles/how-to-clean-greasy-floors-of-factory-2966145.html

About the Author

Duplex Cleaning Machines leading supplier of exclusive range of commercial and industrial cleaning machines throughout Australia and New Zealand.

Attic cleaning and attic rodent pest control

Author: Attic Guys

Attic cleaning and attic rodent pest control are specialized areas of pest control. Often attic cleanup is followed by attic insulation removal and replacement.

Has your attic been contaminated by rodents or other wild animals living there?   Attic insulation makes a very cozy nest for many animals.  Rats, mice, raccoons, opossums, birds, bats and other animals can sometimes find a home in your attic.

While rodents and other animals are living in your attic, they urinate and defecate.  It's not unusual to find your attic filled with animal droppings and urine.  Animal urine pools on the drywall (ceiling) of the home. Many homes have their air conditioning units in the attic which is a concern to many that they may be breathing in contaminated air from their attic.

The animal fecal matter can contain harmful parasites, disease, or odors that are dangerous to humans. If not removed not only will it pose a health risk, but it will also draw other animals back to your attic.  Your home may start to smell bad and urine spots can start to appear on your ceiling.

Attic decontamination can only occur after the animal removal is complete. This is usually a separate process from the animal removal.

The attic decontamination process includes:

•    Removal of animal urine and feces.
•    Removal of urine and fecal stained materials.
•    Treating affected areas with special enzyme based biological decontaminating agents.
•    Treating affected areas with solutions to neutralize the odors.

After attic cleaning and attic decontamination the next step is attic repairs. Attic repairs may or may not be included in the attic cleaning and decontamination service.  An attic cleaning specialist can advise you of the repairs needed and measures to keep those wild animals out of your attic. Also, your homeowners insurance may cover the attic repairs.

It is common to find huge amounts of droppings in the attic. When your attic is contaminated with these unhealthy conditions it may be best to contract professional attic cleaning specialists to remove the animals and waste. They can then decontaminate these your attic while disinfecting and sanitizing your structure.

A professional attic cleaning company can employ large industrial attic vacuums specifically designed to vacuum cellulose and old wood chip attic insulation at about 2,000 square feet per hour. This makes the old day long job of manually bagging the same amount of material faster and easier on time spent on labor. These vacuums are powerful and effective at removing all materials from your attic space including the animal waste, scraps, dust and old dirt. 

After removing the contaminated insulation and animal waste the next step is to disinfect and clean beams and joists with virucidal disinfectants. Photos should be taken before, during and after the cleanup job for home insurance documentation.

Attic cleaning service professionals are usually able to remove 100% of the material in the attic and disinfect the area in one day. For more information on attic cleaning, attic rodent removal and attic decontamination see http://www.atticguys.com.

Article Source: http://www.articlesbase.com/p-articles/attic-cleaning-and-attic-rodent-pest-control-3141106.html

About the Author

The Attic Guys: The Attic Guys offers all your attic cleanup, rat cleanup, rodent removal, decontamination, debris cleanup, and insulation removal & replacement services.

One Way of Overcoming Allergies

Author: Maria Gini

Come spring and there is so much dust in the air thanks to all the spring cleaning going on that developing allergies is as easy as one, two, and three. Vacuum cleaners in UK are getting more sophisticated and you will not have to inhale so much airborne dust when cleaning the home or office. Dust becomes airborne when the vacuum cleaner exhausts air that is not completely filtered which can cause serious health problems like breathing difficulty and allergies, since the operator ends up inhaling this dust.

Vacuum cleaner manufacturers in UK are using several methods to solve this problem. Some methods may be combined together in a single vacuum. Typically the filter is positioned so that the incoming air passes through it before it reaches the motor. Some vacuum cleaners in UK are fitted with a HEPA filter.

The wet & dry vacuum cleaners can soak up water and dust. There are some that use the water filtration principle. In the 1920s a line of water filtration vacuum cleaners was launched commercially which used water as a filter. These force the sucked in air to pass through water before it is exhausted. The idea behind this is that wet dust cannot be airborne. They require the water to be dumped and the machine rinsed out after every use.

This concept of separating the dust from the expelled air has been further refined by vacuum cleaner manufacturers in UK . This new line uses ultra fine air filter; i.e. the air is forced through a secondary filter after it has passed through the rest of the machine. This serves to remove any remaining dust that could harm the operator. Some vacuum cleaners also use a charcoal filter to remove odors. Vacuum cleaners in UK which employ cyclonic separation in an operation similar to that of a centrifuge are also bagless. They cause sucked in air to be cycled or spun so fast that the dust is forced out of the air and falls into a storage bin. Vac master offer variety of vacuum cleaner like commercial cleaner to industrial vacuum cleaner.

Article Source: http://www.articlesbase.com/diy-articles/one-way-of-overcoming-allergies-4342321.html

About the Author

Vac master offer industrial vacuum cleaner, wet and dry vacuum cleaners, wet and dry vacuum and vacuum cleaner acessories on best price.

Blowers and Fans for Industrial Applications

Author: Susanna Terlitskaia

Commonly available practical methods of plants ventilation are:

* Exhaust fans or Power Roof Ventilators (PRVs).

  To do a satisfactory job of eliminating excessively hot air, it is usually essential to have powered wall and/or roof exhausters. These fans should also help to control air pressure within the building whether it be negative or positive pressure.

* Supply Fans or PRVs.

  A large number of buildings use exhaust PRVs to exhaust fumes, smoke, dust or other contaminants unavoidable in the operation of the business. As a result, these buildings are frequently under a severe negative pressure. The solution to the problem of this kind is usually found in the use of supply fans or "make-up" air ventilators.

* Air Circulators.

  If the exhaust and supply air requirements of a building have been carefully engineered and installed, and there continues to be a high instance of worker discomfort, the problem usually relates to the matter of air circulation. In this way, in addition to amximum benefit from the fresh, cooler air, occupants receive the added comfort of air circulation over their bodies and they are not adversely affected by the superheated air being exhausted from the building.

Industrial fans are classified into propeller, tube axial and vane axial styles, and each type has different characteristics. Propeller fans consist of only a motor and propeller and therefore are the simplest. Tube axial are similar to propellers but has a venturi around the propeller to reduce the vortices. Vane axial fans are equipped with vanes that trail behind the propeller in the airflow to straighten the swirling flow.

Air moving fans and ventilators utilize power from a motor to generate a volumetric flow of air at a given pressure, and are considered low-pressure air pumps. A propeller converts torque (turning force) from the motor (typically permanent split capacitor AC induction motors or brushless DC) to increase static pressure across the fan rotor and to increase the kinetic energy of the air particles.

The flow and pressure properties are the main differences between a fan and a blower. While fans deliver air in an overall direction that is parallel to the fan blade axis, blowers deliver air in a direction that is perpendicular to the blower axis. Hence, fans can be configured to deliver a high flow rate, working against low pressure while blowers to deliver a relatively low flow rate against high pressure. Centrifugal blowers can be squirrel cage type, have a forward curved wheel or a backward curved wheel.

Another major difference is in the mechanism regarding restriction to the air-flow. In a blower, it has an opposite effect on the same motor driving a fan blade. For instance, the load on the motor decreases when the motor is driving a squirrel cage blower. As the system becomes clogged, the blower speeds up. On the other hand, the load on the motor increases and the fan slows down as the airflow system becomes clogged with fan blades.

For additional information please refer to http://www.industrialpressureblower.com/index.html.

Susanna Terlitskaia
Industrial Ventilation Engineer
Industrial Pressure Blower Co.
http://www.industrialpressureblower.com/contact.html
http://www.industrialpressureblower.com/inquiry.html

Article Source: http://www.articlesbase.com/industrial--articles/blowers-and-fans-for-industrial-applications-1313153.html

About the Author

Oleg Chechel Ventilation Equipment Designer Canada Blower http://www.canadablower.com/index.html http://www.canadablower.com/oem/index.html

Vacuum that Hurricane Mess

Author: CentralTruckSales

As this author has discussed before, the destructive effects of hurricanes can cause severe damage that will leave an area filled with a huge debris count, including damaged cars, fallen trees, broken poles, and collapsed building infrastructures. After the hurricane passes, extensive flooding that is caused by the storm surge, especially in coastal areas like South Florida, frequently follows and inflicts its own damage as well, significantly clogging and blocking storm sewers which in turn interfere with the drainage systems of entire municipals. Enter the vacuum truck and its storm cleaning capabilities to fix the sewage damage.

Cities and its sanitation departments will locate vacuum truck dealers with reliable used vacuum trucks for sale, designed to clear as much debris as possible as well as clear the basins. These cleaning operations are performed after the flood had subsided and as many vacuum trucks as needed can be deployed for the most affected answers. The crews manually remove the rubble, vacuum the mud that collects in the basins and pressure-wash all involved areas for post vacuum cleanup. In many cases, these operations can fix the big problems quickly enough to start working on the smaller flooding and septic issues, also making the city look benevolent for its extra work for the private sector.

The high-performance, high-quality, industrial vacuum trucks are so readily available as yearly standards result in consistent upgrades and new commissioning of these powerful vehicles. With storms inflicting more damage, and technology allowing for significant changes in the designs, an intensive effort to streamline and promote different types of activities for these vehicles has created fleets with very powerful and very efficient vacuum qualities. By cleaning up catch basins from flood water after storms, as well as, daily needs to maintain municipal sanitation standards, vacuum trucks have morphed into the best possible remedy for disaster. Many municipalities perceive that they will have difficulty in acquiring vacuum trucks because of their expensive price tag and potentially high maintenance costs.

Unfortunately, they do not realize that these vehicles are now available at a lower price and come with a higher quality that makes them overall more affordable. These trucks are a product line intended not only for the transportation of hazardous and toxic waste material but also for the removal and transportation of debris from sewage systems. Indeed, they have become powerful tools that provide the cleaning power and efficient work system that everyone can look to when hurricanes occur and because of their growth in numbers and in capabilities over the years, they have become affordable as well.

To maintain a high level of productivity without the disruption of other recovery activities especially after hurricanes or extensive flooding, a fleet of vacuum trucks is necessary to do the job other equipment cannot handle. Get the job done quick, get the job done right. The affected men and women deserve to have their lives brought back to order as efficiently as possible after a hurricane, and with the right vacuum truck fleet, this becomes a much easier task.

Article Source: http://www.articlesbase.com/trucks-articles/vacuum-that-hurricane-mess-4975528.html

About the Author

Alex Rood is an expert in quality used commercial trucks.  If you are interested in learning more, please contact us by visiting our main site:  http://www.centraltrucksales.net.

How To Utilize Vacuum Chambers

Author: DavidWolf

A vacuum chamber is a rigid enclosure from which air and other gases are removed by a vacuum pump. A vacuum is created to allow for the testing or manufacture of substances that must be conducted in an environment where the pressure is far less than that of the atmosphere. Vacuum chambers that are constructed of aluminum allow technicians to control the magnetic field that is inside the chamber. For vacuum chambers where it is important that magnetic fields do not enter the chamber from external sources, the chamber is constructed of mu-metal.


To eliminate the possibility of contamination, vacuum chambers are used in a variety of industrial processes, particularly in the semi-conductor manufacturing arena, where the slightest amount of contamination can destroy the substrate. These ultra high vacuum applications are frequently utilized in semi-conductor manufacturing processes, because even the slightest degree of contamination can be disastrous in this industry. As we mentioned earlier, thermal vacuum chambers are an ideal environment for testing devices and instruments that must operate in outer space. Many vacuum chambers are constructed of aluminum, because aluminum, unlike other metals, is not magnetic.


Vacuum chambers are frequently constructed with multiple ports, covered with flanges, to allow instruments or windows to be installed in the walls of the chamber. In applications that require only low vacuum levels, rubber seals are used. In higher vacuum applications, the flanges have hardened steel knives welded onto them, which cut into a copper gasket when the flange is bolted on.


A type of vacuum chamber frequently used in the field of spacecraft engineering is a thermal vacuum chamber,, which provides a thermal environment representing what a spacecraft would experience in space. This type of application will also utilize a highly advanced vacuum pump.


Vacuum chambers are frequently used when mixing resins and silicone rubbers. A vacuum chamber is needed when manufacturing resins and silicone rubber to insure that the mold is free of air bubbles. A small vacuum chamber is needed for eliminating air bubbles for materials prior to their setting. The material utilized for molding or casting is created according to its manufacturers instructions. When this type of material is placed in a vacuum, it will normally expand to over 4 times its initial volume, consequently the vacuum chamber must be large enough to handle this volume expansion. If this is not the case, there will not be enough volume in the chamber to finish the process. The container in which the material is held is put into a vacuum chamber and the vacuum is applied when the vacuum pump is turned on. After the vacuum gets to 982 mbar, the material will start to rise. . After the material reaches its full volume it will stabilize and not rise any further. The material is maintained in the vacuum for 3 more minutes in insure that all air has been removed from it. Once this interval is reached the vacuum pump is shut off and the vacuum chamber release valve is opened to equalize air pressure. At this point the vacuum chamber is opened and the substrate is removed and put into a mold.


Vacuum chambers utilized in the semi-conductor industry involve an exceedingly complex process. Due the very high levels of air purity required to avoid contamination of semi-conductor devices, these devices must be processed in ultra pure vacuums. As semi-conductor devices have packed increasingly dense circuitry into smaller and smaller silicon real estate, the need for ever increasing vacuum levels has also risen. For this reason, the most advanced ultra high vacuum chambers and pumps are used in space research and semi-conductor manufacturing. In the manufacture of semi-conductor devices, where particles that are several nanometers in width can contaminate a specimen, ultra high vacuums are employed.


Article Source: http://www.articlesbase.com/technology-articles/how-to-utilize-vacuum-chambers-4447315.html

About the Author
Learn more about the most advanced vacuum pump applications

Industrial Process Systems - Finding, Comparing & Using Industrial Processing Equipment

Author: Rich Milton

From compressed air solutions, heat exchangers to ovens, blowers and other industrial process solutions, IndustrialMRO.com, an international network of industrial MRO supply specialists announced today its latest lines of American Industrial Process Equipment and Systems for its ILG operated directory. The equipment on the site, according to IndustrialMRO includes compressed air & gas dryers and accessories, closed-loop cooling systems, compressed air audits, instrumentation, food processing machinery, filtration equipment, blowers for pressure & vacuums, industrial ovens and other process solutions for manufacturers worldwide. The company said the site offers more than just products with the addition of service, maintenance and repair specialists of various systems and equipment for numerous industries.

Brayden Parker, spokesman for IndustrialMRO.com, a division of the Industrial Leaders Group (ILG) said the company recently revised its Industrial Process Equipment Marketplace to make it more search-friendly for its users. The business-to-business supply marketplace and newly introduced directory, according to Parker was created in partnership IndustrialSAVER to enable manufacturing companies to post and explore offerings for new, used and refurbished processing systems and equipment for heat transfer, compressed air, blending, mixing, food manufacturing, chemical formulation, refrigeration, heating & cooling, filtration, vaporizing, automatic condensing, oil & water separation, air and water cooling, mist eliminating, melting, metallurgical and other applications. The websites are open to the public and serves domestic and international markets.

"IndustrialMRO is committed to marketing suppliers of industrial process systems and equipment for a variety of industries such as, but not limited to food & beverage, pharmaceutical, petrochemical, semiconductor, chemical, electronic, metal finishing, refining, power generation, heat treating and other segments of the manufacturing community," said Parker. He concluded, "IndustrialMRO.com maintains a strong marketing niche to promote manufacturers and distributors of processing equipment and systems such as chillers, aftercoolers, iron & steel furnaces, heat exchangers, hot blast & melting furnace, incinerators, process control instrumentation, blowers, heaters, industrial dryers, chemical process equipment, filtration & separation as well as allied products." Parker went on to explain IndustrialMRO focuses primarily on marketing full-service ISO certified vendors with factory-trained technicians with the capability of meeting both OEM and customized requirements for process systems and accessories.

Article Source: http://www.articlesbase.com/industrial-articles/industrial-process-systems-finding-comparing-using-industrial-processing-equipment-4676478.html

About the Author

About IndustrialMRO

IndustrialMRO.com is a US-based business networking site for plant maintenance, equipment repair and facility operations' managers involved in the manufacturing sector. The site is designed as a buying guide for plant mechanics, production managers and other manufacturing professionals that require various industrial supplies, equipment and machinery at http://industrialmro.com

Cleaning Vinyl Floors Using Steam Cleaners

Author: Tecnovap Australia

It is important to keep your vinyl floor clean not only to look its best, but also to increase its lifespan. Using vapor steam cleaner and steam vacuum cleaner of Tecnovap will make your vinyl floor (waxed or unwaxed) look like new and ready to use for years again. To make this task easy and efficient, use tools and attachments of these vapor steam cleaners and steam vacuum cleaners.

How to clean vinyl floors using steam cleaner?

Unwaxed vinyl floors - it is important to remember not to allow the heat to build on any kind of vinyl that can affect its texture. To remove a stubborn spot, use one small brush and it works fast.

Very dirty waxed vinyl floors - can be cleaned either a vapor steam cleaner or steam vacuum cleaner. On vapor steam cleaner, use the large rectangular brush. As the dry steam turns on move it back and forth motion like vacuuming then wipe with cotton, industrial sized paper towels or better yet, a microfiber cloth. On the other hand, use the floor squeegee and brush at low or medium pressure when using steam vacuum cleaners.

Moderately dirty waxed vinyl floors -- just like the method used above for a very dirty vinyl floors by using vapor steam cleaners with the large rectangular brush. Only this time, cover it with a towel, cloth or microfibre for improved efficiency in a vacuuming motion. Same also when using a steam vacuum cleaner with the floor squeegee and brush at low or medium pressure.

For heavily soiled floors - use the steam cleaner and vacuum separately for a most effective result. Slightly soiled floors use the steam cleaner and vacuum features simultaneously for even faster cleaning.

Generally, cleaning floors have similar cleaning procedures. The important thing to remember is to know first the type of floor you opt to clean so that you can use the right cleaning machine to attain the best and effective result.

Article Source: http://www.articlesbase.com/diy-articles/cleaning-vinyl-floors-using-steam-cleaners-2985201.html

About the Author

If you would like to know more of these products, visit Tecnovap - has been steam cleaning experts since 1992, a leading supplier of highly quality and effective commercial steam cleaners and steam vacuums, the cleaning solution for all surfaces. Distributed Australia and New Zealand wide.

Syndicate content